Flat Nose Regular Jaw for gripping and turning
Long Nose Jaw for tight work spaces. Cuts up to 10 ga wire, strips 12 ga. and 16 ga. wire
Forged chrome nickel jaws
Precision machined teeth and cutting edges
Ergonomically designed grips for comfort and performance
Spring loaded jaws
Carbide for long lasting performance
Six cutting edges on each bit
For use with Ammco Brake Lathe Models 1000, 2002, 3000, 4000, 4100, 7000, 7700
Comes with screws
Kit contains 1/4, 3/8, 1/2, & 3/4" Cutters, Arbor, & Extra Pilot
Blair 13200 - 1/4" Blaircutter (3 Pack): $9.56
When you don't have a lot of holes to make, economical "13,000 Series" Blaircutters provide fast, accurate, burr free holes in materials up to 3/16" thick
Cuts Spotwelds Out Fast
Double-end cutter for more holes
Use in 1/4" or larger drill chucks
Depth of cut control
Blair 13216 - 1/4" Spotweld Pilot With Arbor: $8.01
Economy and quality.
Fast, accurate, burr-free holes for materials up to 3/16"thick in seven sizes for 1/4" and larger drill chucks.
Spring loaded pilot "pops" the slug from the cutter.
1/4" Arbor with retractable pilot for Blair-cutters and Spotweld Cutters
Blair 13217 - Spotweld 1/4" Retractable Pilot (3 Pack): $3.61
"13,000-Series" Blaircutters Economy and quality.
Fast, accurate, burr-free holes for materials up to 3/16" thick in seven sizes for 1/4" and larger drill chucks.
Spring loaded pilot "pops" the slug from the cutter.
Three to a package.
Blair 13218 - Blaircutter Kit: $50.22
Because they're hollow there's no dead zone as with twist drills. And unlike hole saws , that rip and tear through the material, they quickly give you quality, virtually burr-free hole.
Includes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" and 5/8" cutters, arbor and 3 extra pilots
When you don't have a lot of holes to make, Blaircutters provide fast, accurate holes in materials up to 3/16" thick
Blaircutters are annular cutting tools that cut around the edge of the hole and eject the center as a slug
Spring loaded pilot "pops" the slug from the cutter
Packaged in a blow molded case
Double-End Spotweld Cutter Assembly - 3/8"
Contains one #13216 Arbor, one retractable Pilot and one 3/8" double end Cutter.
Blair 13229 - Flanger: $24.54
Repairs made in half the time with absolutely no stretching or distortion of material.
Makes a perfect joint even through underbody deadener in sculptured contours and high crowns.
No need to remove parts of the vehicle - with the Blair Flanger, all work is performed from one side.
Lightweight 7" cam action flanger springs open for quick release and position of next compression.
Blair 51000 - Paint Shaker Tornado II: $365.00
Blair Tornado II Paint Shakers
can be set on a work bench
without bolting down the unit
thanks to its unique design.
You can use Blair Tornado II Paint
Shakers anywhere* its convenient to
mix gallons, quarts, pints, or aerosols.
The Tornado II mixes paints
completely utilizing three axis of
motion, including orbital, sideto-
side, and up/down.
To achieve these multiple
motions, the portable shaker
spins an eccentric weight rather
than using crankshafts, belts, or
pulleys which can wear out and
break.
Lightweight at only 24 lbs.
The fewer moving parts also
minimizes noise while the paint
shaker is in operation.
A quick and easy to use four point
clamping system that securely holds
containers during mixing.
Blending cycles can be set to
numerous time intervals via the
convenient up-front control panel.
Blair Tornado II Paint Shakers have
a full one year warranty from date
of purchase against defects due to
faulty material or workmanship.
Bondhus 13189 - 8 Piece Balldriverฎ T-Handle Metric Set with Stand (2-10mm): $29.56
Precision cut hex tip for full tool engagement in the screw.
Balldriverฎ Tip for angle entry to 25ฐ.
Welded Handle creates the stongest and longest lasting T-handle made.
Protaniumฎ High Torque Steel is up to 20% stronger than competitor tools.
ProGuardฎ Dry Surface Finish is the best rust and corrosion protection available.
Cushion Grip T-handle: -Handle is comfortable even with continuous use. -Ergonomically shaped, eliminating pressure points. -Heavy duty handle generates flywheel effect for super fast insertion and extraction of screws.
Molded T-handle stand can be set on work bench or mounted on a wall.
Bondhus 13190 - 10 Piece Balldriverฎ T-Handle Inch Set with Stand (3/32-3/8'): $35.58
Precision cut hex tip for full tool engagement in the screw.
Balldriverฎ Tip for angle entry to 25ฐ.
Welded Handle creates the stongest and longest lasting T-handle made.
Protaniumฎ High Torque Steel is up to 20% stronger than competitor tools.
ProGuardฎ Dry Surface Finish is the best rust and corrosion protection available.
Cushion Grip T-handle: -Handle is comfortable even with continuous use. -Ergonomically shaped, eliminating pressure points. -Heavy duty handle generates flywheel effect for super fast insertion and extraction of screws.
Molded T-handle stand can be set on work bench or mounted on a wall.
9 Piece Metric Set (1.5-10mm)
13 Piece Inch Set (.050-3/8")
Ball end tips for easy screw entry.
Faster in/out using the ball end.
Ball end tools can be rotated up to 25ฐ in all directions.
Protaniumฎ High Torque Steel is up to 20% stonger than competitor tools.
ProGuard Dry Surface Finish is the best rust and corrosion protection available.
Bondhex Cases included. -Locks keys into place with a twist. -Sorts and prevents loose/lost wrenches. -Sizes are printed on case to find tools at a glance. -Case may be used to increase leverage. -Cases are color coded red for metric and yellow for inches.
Features fixed tips.
Easily converted to internal or external.
Includes durable, molded case for storage.
Set includes: .038, .047, .070, .090ฐ - Straight Tip Plier .038, .047, .070, .090 - 45ฐ Tip Plier .038, .047, .070, .090 - 90ฐ Tip Plier
Central 3M130 - Rotor Micrometer: $34.63
.300 - 1.300 inch range
0.0001 inch graduations
3 1/2 inch frame
Central 3M230 - Rotor Micrometer: $40.97
.300 - 1.300 Inch Range
0.0001 Inch Graduations
Digital Readout
Electronic Specialties Inc. 585K - Deluxe Automotive Meter w/RPM & Temperature + Zipper Case: $88.47
The ES 585 is an automotive meter that does it all! This is a professional grade tool used for diagnosing electrical, computer and engine problems on any vehicle. Among its testing capabilities are: AC/DC Volts, AC/DC Amps, Ohms, RPM, Dwell, Frequency, Duty Cycle, Temperature, Continuity and more. The ES585 includes two sets of test leads, RPM pick-up, temperature probe, protective holster and instructions manual.
Features:
Analog Bargraph Display and Large Digits
Measures Volts, Ohms, Amps, RPM, Frequency, Temp., Duty Cycle, Dwell, Continuity & more!
42 Test Ranges
10 Meg/Ohm Input Impedance
Fuse protected, safety leads and jacks
Protective Holster
DC Volts 0-320mV, 3.2V, 32V, 320V, 1000V
AC Volts 0-3.2V, 32V, 320V, 750V
DC Current 0-320uA, 3.2mA, 32mA, 320mA, 10A
AC Current 0-320uA, 3.2mA, 32mA, 320mA, 10A
Ohms 0-320, 3.2K, 32K, 320K, 3.2M, 32M
RPM (Tach) 0-3200 RPM, 12,000 RPM
Dwell Angle 3 cyl, 4 cyl, 5 cyl, 6 cyl, 8 cyl
Duty Cycle 0-90%
Frequency(Hz) 0-320Hz, 3200Hz, 32kHz
Temperature -20C to 320C, -20C to 750C -4F to 320F, -4F to 1400F
Continuity Audible Beep
Diode Test Test current 0.6 mA, Open circuit voltage 3.0V
Laser sighting
Backlit Display
Measures 6" Diameter Target from 4' Away
Displays degrees Fahrenheit and Celcius.
Response time is .5 seconds or less.
Professional grade contruction and design.
Includes 9V battery.
Specifications:
Temp range: -58ฐ to 1022ฐF; -50C to 550C
Accuracy: +/- 2% of Reading.
Distance to Spot Ratio: 8 to 1
Emissivity: 0.95
Resolution: .01 degree up to 200 degrees, 1 degree over 200 degrees.
Laser: Class II
Warranty: One Year
Electronic Specialties 700 - 6/12 Volt Battery Tester: $28.88
Internal 120 Amp loading capacity
Test battery voltage, starter current draw, charging voltage and battery condition
Extra heavy duty stainless steel case
Convenient handle for carrying and hanging
Heavy duty cable and copper plated clamps
Complete with instruction booklet
H & S DK1000 - Dent Killer - Dent Puller Attachment
: $140.36
The DK1000 Dent Killer is welded to the panel surface using a UNI-SPOTTER stud welder
Features and Benefits:
Works great to restore body lines
Works with all UNI-SPOTTER stud welders
Quick & easy to use
Lightweight and portable for out-of-position pulls
H & S 2120 - Uni-Wire Kit
: $176.15
The most complete Uni-Wire Kit available
Fits any Uni-Spotter Model Welder
Kit includes the Uni-Wire Tip and adapter, both the 4 finger and 9 finger uni-claw to handle any pull, and a 1/2 lb. bundle of premium quality Uni-Wire
H & S 4500 - Autoshot Stud Welding Starter Kit / UNI-4500: $230.14
Stud Weld on High & Galvanized Steels w/ ease
Grounded 3 Wire Cable
Easy to use POSI-CAM Slidehammer
Built in Overload Protection
2 Year limited Warranty
Hanson - Irwin # 1921 - 6 Piece Taper Pipe Tap Set (HCS): $79.24
Cuts internal threads in pipes
Nominal size of the tap is that of the pipe fitting being tapped
Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP)
Ideal for pipe fittings
Tapered at a rate of 3/4" per foot
Set includes one taper tap each of: 1/8" - 27 NPT, 1/4" - 18 NPT, 3/8" - 18 NPT, 1/2" - 14 NPT, 3/4" - 14 NPT, 1" - 1-1/2" NPT
Hanson - Irwin # 26376 - 76 Piece Machine Screw / Fractional / Metric Tap & Hex Die Set: $199.56
76-pc set in plastic case includes the following items:
Machine Screw Plug Tap and 5/8" Hexagon Dies in sizes: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF, 12 - 24 NC
Fractional Plug Tap and 1" Hexagon Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NF
Metric Plug Tap and 5/8" Hexagon Dies in sizes: 3mm - 0.50, 4mm - 0.70, 4mm - 0.75, mm - 0.80, 5mm - 0.90, 6mm - 1.00
Metric Plug Tap and 1" Hexagon Dies in sizes: 7mm - 1.00, 8mm - 1.00, 8mm - 1.25, 9mm - 1.00, 9mm - 1.25, 10mm - 1.25, 10mm - 1.50, 11mm - 1.50, 12mm - 1.50, 12mm - 1.75
Pipe Thread Plug Tap and 1" Hexagon Dies in sizes: 1/8" - 27 NPT, 1/8" - 28 BSP
Threading Tools: Adjustable Die Stock - 1" Dies, Plain Die Stock - 5/8" Hexagon Dies, Adj. Handle Tap Wrench - Taps No. 0 to 1/2", Two-in-One Tap Wrench - Taps 1/4" to 1/2", T-Handle Wrench - Taps No. 0 to 1/4", 16 Leaf Metric Thread Pitch Gauge, 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case For 26377
Sizes: 1/8" through 7/8"
Aggressive left-hand spiral design for extra gripping power
For use with sockets and flat wrenches
Made from tough C4150 alloy steel for longer tool life
MADE IN USA
Weight 5 lbs.
Drop Forged and Hardened Steel Jaws 
Precision Ground Cutting Edges 
Precision cut hex tip for full tool engagement in the screw. 
9 Piece Metric Set (1.5-10mm) 
3-1/2" Reach 
Features fixed tips. 
The ES 585 is an automotive meter that does it all! This is a professional grade tool used for diagnosing electrical, computer and engine problems on any vehicle. Among its testing capabilities are: AC/DC Volts, AC/DC Amps, Ohms, RPM, Dwell, Frequency, Duty Cycle, Temperature, Continuity and more. The ES585 includes two sets of test leads, RPM pick-up, temperature probe, protective holster and instructions manual. 
Laser sighting
