If you don't see something, just ask - we might be able to get it!
Lisle 12100 - Oxygen Sensor Socket: $10.44
Removes and Installs Oxygen Sensors on Most Domestic and Some Imports.
Special 7/8" socket with cutaway slot to provide clearance for wire harness. Provides adequate depth to fit over sensor. Heat-treated alloy steel. Use with 3/8" square drive or 1" wrench.
Lisle 12230 - Oxygen Sensor Thread Chaser: $4.03
Cleans Threads in Oxygen Sensor Holes.
Use with 3/4" hex socket or 3/8" square drive. Size: M18x1.5 Also works on M18x1.5 spark plug threads. IMPORTANT: Use anti-seize.
Makes it Easier to Insert Bearing Race.
Insert bearing race quickly, straight in on FIRST TRY! Helps reduce damage to both race and axle housing. Six driver sizes fit most bearing race sizes. Turn driver over to drive seals. Three larger drivers available separately.
This Master Set Contains 11 Drivers to Fit Automobiles and Trucks up to 1 Ton.
This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer. Use the tapered driver side for bearing races; reverse to the flat side for seals. Sizes: 1.565, 1.750, 1.965, 2.325, 2.555, 2.830, 2.995, 2.470, 4.625, 3.813, 3.180.
Molded case.
Makes it Easier to Insert Wheel Bearing Race and Seals Without Damage to Race and Axle Housing.
This master set includes nine drivers to fit most common wheel bearings. Turn discs over to drive seals.
In convenient clam shell for storage.
Lisle 13200 - Oil Pressure Switch Socket: $4.89
Fits 1" and 1 1/16" Switches Up To 1 5/8" Long.
One socket with the correct length to fit 1" and 1 1/16" oil pressure switches (for vehicles equipped with warning lights). 1 7/8" overall height for clearance.
Use with 3/8" drive or 1 1/8" hex.
Lisle 13250 - Oil Pressure Switch Socket: $6.24
Fits 1 1/16" Switches Up To 2 5/8" Long, Found on Newer GM and Chrysler Vehicles.
Fits 1 1/16" oil pressure sending unit (gauge type), found on most all '91 and newer GM vehicles. Also fits '87 and newer Chrysler vehicles with combination light and gauge oil pressure switches.
Use with 3/8" drive or 1 1/8" hex.
Lisle 13500 - 41mm Water Pump Wrench For GM 1.6L: $15.47
Use with 3/8 square drive and short extension to easily adjust and hold the water pump when replacing or adjusting timing belt.
Stubby tool design allows access to timing belt sprocket without interference from vehicle frame. Works on 1.6L engines in 2004-current Chevrolet Aveo excluding 2009 with variable timing engine and 1999-2002 Daewoo Lanos. Heat treated alloy steel for strength.
Lisle 14400 - Headlight Adjuster For Ford: $3.35
Fits 4mm hex headlight adjusting bolts.
Works on Ford, Mercury and Lincoln cars and pickups with aerodynamic headlights.
Lisle 14440 - Water Pump Wrench For GM Northstar: $18.17
Removes & Installs the Water Pump Assembly on GM Northstar 4.0L & 4.6L Engines.
Turn the tool with a 1/2" drive ratchet or breaker bar. Angled teeth prevent the tool from slipping.
Lisle 14500 - Oil/Fuel Socket for 6.0L Ford Diesel: $6.71
Removes and installs filters on 6 Liter Ford Diesel Pickups
The low profile socket fits both the 35mm and 36mm fuel and oil filters
The low profile socket works in confined spaces
3/8" drive
Not for use with an impact wrench
Lisle 14540 - Headlight Adjusting Ratchet For Ford: $12.12
Works on Ford Aerodynamic Headlights with Rear Mounted Adjusters.
Tool is used to adjust aerodynamic headlights with rear mounted adjusters on Ford vehicles. These adjusters are not easily accessible and require this tool for adjusting. The extra long handle allows easy access to hard-to-reach spaces.
Tool has a 4mm hex with a roller clutch for infinite settings.
Helps Remove and Install Fuel Filters on 5.9 Liter Cummins Engines.
Use the low profile, 29mm socket on the raised hex on the fuel filter housing. 3/8" drive.
Removes and installs oil filters on 2.2 liter GM Ecotec engines.
The low profile 1 1/4" socket is specially designed for operating clearance.
3/8" drive.
Not for use with an impact wrench.
Lisle 16750 - Valve Spring Compressor: $26.61
An "ON THE CAR" Tool.
Makes compressing the spring and removing the keepers a simple job because there is no need to remove the head. Adjustable cam action. Fast, because there is no need to readjust the tool after each spring.
Lisle 17100 - Flat Band Hose Clamp Pliers: $20.20
Adjustable Jaws Fit All Clamp Sizes for Easy Removal and Installation.
This tool removes and installs flat band hose clamps used on heater and radiator hoses. Tips screw in and out to fit all clamp sizes. Ratcheting lock mechanism holds the clamp in an open position for easy removal and installation. Tips can be switched to accommodate different applications. Offset jaws allow access in hard-to-reach areas.
Lisle 17432 - 18 Gallon Oil Lift Drain: $151.60
Quick Release Height Adjustment. Translucent jug holds 18 gallons and will not warp with hot oil.
Rolls easily with four heavy-duty 2 1/2" wheels. Metal tubes extend working area from 36 1/2" to 77". Drains from the bottom with a brass drain valve. Large 15" funnel has a built in strainer to catch drain plugs.
Optional 17442 Oil Pump Kit not included.
Lisle 17850 - Axle Seal Driver For Ford: $55.60
Installs Front Seals and Rear Axle Seals on Ford Vehicles.
The double-ended adapter installs both front and rear seals. A long 27 3/4" handle reaches beyond suspension components to make hammering easier. The adapter is bored to fit over the axle stub.
Designed to transfer liquids into a 55 gallon drum.
The funnel drain sits on the top cover of 55 gallon drums. The funnel snout fits into the top bung hole for draining purposes. Four graduated circular indentations fit different oil filter sizes.
Drives Camshaft Bearings Smoothly.
Easy on Bearings. Now, one complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.125" to 2.69" (28.58 - 68.3mm). The expander has a neoprene sleeve over which the split driving plugs are mounted and expanded to size. This tool has two sets of rubber sleeves supplied with it for each expanding driver. The brown sleeves are used when driving thin wall bearings (.065). The black sleeves should be used when driving thick wall bearings (.090). Instruction sheet T18000 provides complete, illustrated operating instructions and parts list. Includes: Driving shaft, driving shaft extension, expander unit, five split driving plugs, two driving collars, centering cone and blow molded case.
Shipping wt. 17lb.
Lisle 19122 - Truck Drain On Wheels: $149.99
Easily holds up to 60 quarts.
Equipped with 4 rollers and a handle for easy transport and positioning under the truck.
The sides curve inward to keep the oil from spilling during movement.
Convenient handles and a pour spout facilitate spill free oil evacuation.
Rolls under most all cab over axles so the oil can be changed without jacks or jack stands.
Overall height 10, width 24 1/2, length 43.
The 6 piece set removes standard and metric bolts, nuts and studs from 1/4" to 9/16" (6mm to 14mm).
Drive the proper size remover over the bolt head, nut or stud. The remover spline cuts into the bolt head or threads for a sure grip.
Lisle 19940 - Pivot Pin Remover: $6.04
Removes the pivot pin on GM, Ford and Chrysler tilt and telescoping Saginaw steering columns.
Includes an extra screw.
Lisle 20130 - Magnetic Glove Dispenser: $17.51
Two large magnets hold the dispenser in place. Or, mount it on a wall using the screw slots provided. Fits all common sizes of disposable rubber glove boxes, both 50 and 100 packs. The dispenser has 3 adjusting springs which can be adjusted as necessary to hold the various box sizes. Made of powder coated steel.
Lisle 20400 - Shock Absorber Tool: $9.41
For Removing and Installing Shock Nuts.
Fits most domestic models and some Ford OEM shock nuts. Place stem socket over shock stem. Hex nut socket fits the nut. Hold one, turn the other for removal.
Lisle 20900 - Radiator Cap Pliers: $9.41
Fast, Safe Removal of all Standard Radiator Caps.
Simply engage the pliers over the cap, press down, rotate and release.
Lisle 21520 - Truck Pedal Depressor: $29.63
Depresses and Holds Clutch Pedals and Brake Pedals.
The two-piece, telescoping tool extends to the pedal and locks in position. Brace the formed plate against the seat or the steering wheel for firm support. Tool extends from 18 1/2" to 34 1/2".
Fits All Common 4-WD Pick-up Spindles.
Stepped design fits 1 1/2", 1 5/8" and 2" spindles. Use with either a 1/2" - 20 or 5/8" - 18 slide hammer.
Lisle 22500 - Thermostat Gasket Cleaner: $15.83
Cleans All Hard To Reach Gasket Surfaces.
Use with a die grinder to quickly clean gasket surfaces on oil pans, water pumps and other inaccessible applications. The tool is equipped with a floating guide shaft so the user can steer the abrasive pad around the gasket surface. Replaceable abrasive pad works in seconds.
Lisle 22710 - Disconnect Set for Jiffy-Tite Connectors: $52.95
Disengages the line from Jiffy-tite quick-connect fittings without removal of the clip.
Handy spring-action of the stainless steel tool keeps the tool on the line and makes the tool easier to use. Teeth of the tool fit perfectly into tight tolerance of Jiffy-tite connectors and whenrotated allow the line to be pulled without damage to the connector or retaining clip so they can be reused. Tools fit the most popular Jiffy-tite fittings found on oil cooler lines used on transmissions and radiators and on other applications. Applications: 1996 and newer GM vehicles; Many 2004 and newer Daimler Chrysler vehicles; Some 2005 and newer Mercedes vehicles; Harley-Davidson V-Rod; Freightliner; Peterbilt; Volvo; White.
Lisle 22800 - Wheel Stud Installer: $21.89
Easily Installs New Wheel Studs.
Use with a ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug nut against the tool to pull the stud in place. Works on most all automotive and light-duty truck wheel studs, import and domestic.
NOTE: The bearing will wear with use and is not warranted.
Lisle 24300 - Speedy Brake Pad Spreader: $32.01
Compresses Brake Pistons In Seconds.
Squeeze the handle and the fast acting plunger compresses disc brake pistons in seconds. Makes brake pad replacement an easy job.
For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads.
Includes 5 adapters for use in both 2 and 4-wheel rear disc brake assemblies of most domestic and import cars. Tool may be used "on" or "off" the car. A real time saver that makes this tough job easy. Helps prevent damage to the piston and boot.
Compresses Dual Brake Pistons Simultaneously.
Squeeze the tool handle until the plunger contacts the inboard brake pad, then continue squeezing to compress both pistons.
Makes dual piston pad replacement a simple job.
Lisle 27200 - Torx Bit Socket Set 12PC: $24.92
All Torxฎ bits are made of heat-treated alloy steel
Set comes in a convenient vinyl holder
Includes: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-47, T-50, T-55, T-60 Torxฎ sockets
Combination tool for both 4-slot and 6-slot applications.
1/2" drive. Not for use with impact wrench.
Lisle 28890 - Anchor Pin Bushing Remover: $35.04
Also Removes Truck Leaf Spring Bushings.
Pneumatic bushing driver set removes and installs truck and trailer anchor pin bushings and stuck anchor pins. Drive the bushing out with the small cone. Use the larger cone to install bushing to the proper depth.
A Fourth Socket for this Popular Set!
Now, there are four double-ended sockets to fit eight common domestic and foreign antenna nuts. The smaller three sockets are 7/8" hex and the larger socket is 1 1/4" hex. Sockets are made of heat-treated alloy steel for strength. New fourth socket fits some Nissan and Toyota applications. Complete applications are listed on the card. Sockets are also available individually. The new 29650 supersedes the 29800 3-piece set.
Lisle 29900 - 4WD Bearing Locknut Tool: $17.51
Full Tooth Engagement is Designed Not to Slip.
Fits 4-slot 2 1/2" lock rings used on common 4-WD trucks. Use with 1/2" drive. Not for use with impact wrench. See application chart for uses.
Lisle 31310 - Double Flaring Tool Set: $34.71
Makes Both Single and Double SAE Flares.
This tool set includes everything to flare thin wall steel, aluminum or .040 wall soft copper tubing. The set includes 5 thread dies and adapters for forming double flares on the following tubing sizes: 3/16", 1/4", 5/16", 3/8" and 1/2". However, this set is not for use on stainless steel tubing. The set is packaged in a durable, oil and grease resistant tray for storage. Full instructions are included.
Lisle 31500 - Exhaust/Strut Cut Off Tool: $23.91
Cuts Out-of-Round Pipes.
Four knife-edged cutting wheels cut quickly and cleanly. Can be operated with one hand. Less than 1/3 turn cuts all the way around the pipe. Unique design allows tool to "shift" to make out-of-round cut. Big 1 3/8" to 2 1/2" (34.9 - 63.5mm) range.
Lisle 32000 - Pipe End Shaper: $26.95
Rounds Pipes In or Out.
The Lisle 32000 rounds out exhaust pipes that are crushed or bent. Also reshapes pipes bent or flared out by placing big end over pipe.
Range is 1-1/2" to 3-5/8" (38.1 - 92mm).
Priced Each
Lisle 34350 - Water Sensor Wrench for Duramax Diesels: $5.57
Use when replacing the fuel filter or when servicing the water sensor. Plastic sensor has a 12 sided design that is easily damaged by tools, like pliers, that do not specifically fit the sensor.
Lisle 34400 - Exhaust/Tailpipe Stretcher: $91.53
Stretches All Pipe Including Stainless Steel.
Use with an impact wrench to quickly stretch pipes. Two collet sets fit pipes from 1 5/8" to 2 7/16". Can be used on the car. The pipe stretcher is a convenient, inexpensive alternative to hydraulic pipe expanders. Additional collets (5) extend range to 4 1/4". (Not included in 34400 set.)
Fits GM Flex Fuel Systems.
Disconnects the fuel line from the fuel filter on 5.3L Suburban, Tahoe, Yukon, Avalanche and select Silverados and Sierras. Insert the two semicircular disconnects into the coupling. Connect the handle and depress to separate the fuel line from the filter.
Locks Camshaft Sprockets in Place During Belt / Chain Replacement.
This versatile tool easily locks and holds both camshaft sprockets firmly in place. Unique design uses knurled pins to hold against the inside of the cam sprockets. The two parallel bars "float" which allows the knurled pins to align with the sprockets. Preserves the engine timing during belt or chain replacement.
Easily Disconnnects Air Conditioning Lines and Quick Connect Fuel Lines.
Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning lines.
Also works on fuel line quick connect couplings found on GM, Ford and Chrysler.
The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines.
Easy to use in confined spaces.
Set includes six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
Lisle 37500 - Fuel Module Disconnect for GM: $4.69
Disconnects the Fuel Module on 98 and Later GM Full Size Pickups, Suburban and Tahoe.
The 2 piece design allows access to the connectors. Slide the proper size end into the connector. Then rotate and slide the other half in place. Now the module can be disconnected. Fits both 3/8" and 5/16" connector sizes. Will also fit all other 3/8" and 5/16" applications. The tool can be clipped together for convenient storage.
Lisle 38210 - Hub Removal Kit For Dodge: $29.63
Separates the frozen hub assembly from the steering knuckle on Dodge vehicles.
Tool drives against loosened retaining bolts to separate assembly. Prevents damage to the knuckle and complete hub assembly. Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed. Kit contains 39300 for older, smaller applications and 39250 for 2003 and newer 4-wheel drive 3/4 ton and 1 ton Dodge pickups.
Lisle 38220 - Universal Cam Adjuster: $28.96
Adjusts to Fit Different Sized Cam Sprockets.
This adjustable tool is designed to both hold and turn cam sprockets. The tool is needed to turn the cam sprockets to adjust the cam position. It can also be used to hold the cam sprocket in place when removing the cam bolt. It will work on all single and dual overhead cam sprockets with holes.
Lisle 38850 - Pulley Puller/Installer: $46.49
Removes and Installs Pressed on Power Steering, Alternator and Air Pump Pulleys.
Makes removing pressed on pulleys an easy job. This puller will remove and install pulleys on most GM, Ford and Chrysler vehicles. Special adapters are included for GM 3.1 and Quad 4 engines. Works on traditional V-shaped pulleys and serpentine belt system pulleys. Tool comes with detailed instructions and a heavy-duty plastic storage case.
Lisle 39000 - No Slip Pulley Puller: $57.28
Removes and Installs Pressed on Power Steering, Alternator and Air Pump Pulleys WITHOUT SLIPPING.
The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys. Fits most domestic models including GM 3.1 and Quad 4 engines. Works on traditional V shaped pulleys and serpentine belt system pulleys. Also works faster than other conventional pulley pullers.
Lisle 39300 - Front Hub & Knuckle Separator: $15.01
Prevents Damage to Bearing & Other Components when Removing Front Hub.
The tool drives against loosened retaining bolts to separate the hub from the knuckle. Used on Dodge and GM pickups, Cadillac, Jeep and other applications. Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed. Made of super strong tool steel for durability.
Lisle 39900 - Master Disconnect Set: $43.79
Contains 8 Popular Disconnect Tools for A/C & Fuel Lines.
A complete set of disconnect tools that can be stored in a handy blow-molded case. All disconnect tools are also available individually.
Twenty-six separate socket compartments allow you to keep your 1/4" standard and deep sockets in one convenient holder
Holds sockets up to 5/8" or 15mm
Design of holders leaves sockets exposed for easy identification
Powerful magnets securely hold sockets in tray, and tray to any steel surface
Made of strong ABS plastic
Other Available Color:
# 40130 - 1/4" Drive Magnetic Socket Holder - Green: $12.79
Twenty-eight socket compartments that allow you to keep your 3/8" standard and deep sockets in one convenient holder.
Holds sockets up to 1" or 24mm.
Design of holders leaves sockets exposed for easy identification.
Powerful magnets securely hold sockets in tray, and tray to any steel surface.
Made of strong ABS plastic.
Fits most 3/8" socket sets.
Other Available Color:
# 40200 - 3/8" Drive Magnetic Socket Holder - Red: $16.16
Twenty-two socket compartments allow you to keep your 1/2" standard and deep sockets in one convenient holder.
Holds sockets up to 1" or 20mm.
Design of holders leaves sockets exposed for easy identification.
Powerful magnet holds sockets in tray.
Rubber feet protect tool box from scratching.
Made of strong ABS plastic.
Made especially for impact socket sets.
Other Available Color:
# 40990 - 1/2" Drive Magnetic Socket Holder - Green: $21.55
Lisle 41100 - Brake Spring Washer Tool For Ford: $6.04
For Ford Contour, Focus and Mercury Mystique.
This tool easily removes and installs the difficult brake spring clip found on smaller Fords. Insert the tool tip into the spring clip. Then compress the spring with the tool and slide it off the brake pin. Reverse procedure to install.
Lisle 41500 - Pickle Fork Kit: $37.05
For Separating Ball Joints, Tie Rods, Pitman Arms and Other Uses.
Six tools in one for exceptional versatility and value. Kit consists of three forks and two handles; one for hammering, the other for use with an air hammer (.401" shank). All forks are threaded to interchange with either handle. Forks are heavy-duty forgings, handles are heat-treated alloy steel.
Lisle 41800 - Fan Clutch Wrench Set For Ford: $70.11
Removes Fan Clutch on Most All Ford Vehicles.
This wrench set removes and installs Ford fan clutches when repairing or replacing the water pump, timing chain or the fan clutch. Set includes two holding wrenches and two open-end wrenches. The double-ended wrench and small holding wrench work on 2.8, 2.9, 3.0, 4.0 and 4.9 liter engines. The larger open-end wrench and larger holding wrench fit 6.9 and 7.3 liter diesel engines. Wrenches are available individually.
Lisle 41900 - Pitman Arm Puller: $21.55
Heavy Duty Puller Works on Most Cars & Trucks.
Designed to work on even the most stubborn Pitman arm pulling jobs. Position puller jaws over Pitman arm and turn center screw to free Pitman arm. Puller body is drop-forged and heat-treated for strength.
Lisle 41970 - Heavy Duty Pitman Arm Puller For Ford: $28.31
For 2005 and Later Ford F250 & F350.
A heavy-duty puller for the large Pitman arms on Ford 250 and 350 trucks. Jaws are forged and heat-treated for strength. Position puller jaws under the Pitman arm, turn center screw to remove.
Lisle 42500 - Long Arm Hex Key Set: $6.71
Allows for longer reach for deep socket Allen-type screws. Also increases torque. Set includes 2 fractional hex keys .05" to 5/16". Heat-treated alloy steel.
Lisle 42920 - Universal Fan Clutch Wrench Set: $77.51
Removes Fan Clutch on Most Models.
This 2-piece set removes and installs fan clutches. The set includes a universal holding wrench and a universal turning wrench. The holding wrench is adjustable to fit the bolts that attach the pulley to the water pump. The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8" (22 mm), 1 7/16" (36 mm), 1 9/16" (39 mm), 1 7/8" (47 mm) and 2" (50 mm). Both wrenches are long to provide extra leverage for stubborn fan clutch nuts. Made of heat treated alloy steel to provide strength.
Lisle 43300 - Pneumatic Fan Clutch Wrench Set: $138.76
Quickly Removes & Installs Fan Clutch When Repairing The Water Pump Or Fan Clutch.
Does the job much faster and easier than conventional fan clutch wrenches. No holding wrench is necessary. The set includes 7 driving wrenches that fit Ford, GM and Chrysler. Driving wrench sizes include: 36mm, 1 1/2", 1 9/16", 41mm, 42mm, 1 7/8" and 2". Use with an air hammer.
Pneumatic Action Removes Oxygen Sensors.
Use this set with an air hammer to remove stubborn, baked-on oxygen sensors.
Pneumatic action works where conventional sockets wont.
Compact design allows easy access under the hood.
To install sensors, use the socket only with a 3/8" drive ratchet.
Shipping wt. 1 lb. 4 oz.
Lisle 44180 - Fan Clutch Spanner Wrench: $31.65
For GM, Jeep and Dodge Trucks, Vans and SUVs With Pressed on Water Pump Pulleys.
The double-ended spanner wrench fits the holes in pressed-on water pump pulleys. Hold the pulley firm with the spanner wrench. Use the appropriate open end wrench to turn the fan clutch nut (41740 36mm turning wrench works on many applications).
Lisle 45300 - Harmonic Balancer Puller For GM: $30.31
For GM 3300 And 3800 V6 Cylinder Engines.
The 45300 is equipped with the special bolts and adapters to pull the harmonic balancer cleanly without damage to the crank sensor. Order the 45350 Retrofit Kit to use with your Lisle 45500 Harmonic Balancer Puller.
Lisle 45500 - Harmonic Balancer Puller: $18.85
Helps Stop Damage to Pulley and Shaft.
Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft.
Retrofit Kit:
#45350 - Retrofit Kit For GM 3300 And 3800 V6 Cylinder Engines: $12.12
Lisle 46170 - Hood Prop with Support: $29.31
Includes a support to help prevent slipping
Telescopes from 18-1/2 in. to 46-3/4 in.
Lisle 46700 - Tie Rod Puller For Ford: $13.47
For use on 2002 and newer Ford SUVs with independent rear suspension.
Removes tie rod by inserting the angled tips between the tie rod and boot. Use with a slide hammer to pull rear suspension link or tie rod end from the rear knuckle assembly. Helps eliminated damage to tie rods by pulling straight out rather than prying or hitting the tie rod with a hammer.
Lisle 51300 - Parking Brake Adjusting Spoon For Ford: $10.09
Double-ended tool speeds star wheel adjusting on Ford F-150. Also works on F-250/F-350 super duty trucks with Dana 80 rear axles.
Tool adjusts star wheel through access slot in backing plate. Squared tip works on F-250 and F-350. Angled tip with cutout for extra clearance works on F-150 pickups. Use on drum in hat parking brake mechanism that is mounted inside the disc brake assembly.
Lisle 51400 - Brake Spoon For Taurus: $4.37
Works from the top to speed star wheel adjusting on 2001-2006 Ford Taurus, Windstar and Mercury Sable and other drum brakes with top mounted adjuster.
Insert tool through slot in backing plate. Angled ends for easy access.
Lisle 52650 - Harmonic Balancer Installer: $49.19
This set includes a driving screw, thrust bearing and threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers.
Lisle 52750 - Stethoscope Set: $17.51
Dual Purpose Set Detects Both Mechanical and Air Induced Sounds.
Use the black diaphragm chamber and screw-in metal probe to detect mechanical sounds from bearings, engines, trans-missions, etc.
For air induced sounds, attach the vinyl hose to the hollow tube and funnel assembly. The funnel amplifier will detect noises from vacuum leaks, exhaust leaks, air leaks and wind noise.
For hard to reach locations, remove the funnel and use the hollow tube.
Shipping wt. 10 oz.
Lisle 54640 - Pneumatic Tie Rod Rattler: $18.84
Loosens bolts and clamps on tie rods for removal or adjustment.
Use with an air hammer to vibrate seized clamps and bolts on many sizes of tie rods. Standard .401" shank. If possible, loosen bolts/clamps and drive with a standard .401" shank air hammer. Works especially well on Ford F-Series trucks and SUVs.
Ten 3/8 Drive Cap Oil Filter wrenches.
Fits 95% of domestic and import automotive applications.
Complete set comes in a handy 10 x 13 plastic case.
Includes Sizes: 65/67mm - 14 Flutes 80mm - 15 Flutes 68mm - 14 Flutes 86mm - 16 Flutes 74/76mm - 15 Flutes 93mm - 15 Flutes 76mm - 14 Flutes 93mm - 36 Flutes 76mm - 30 Flutes 100mm - 15 Flutes
Lisle 54980 - 10 Pc. European Filter Wrench Set: $60.64
Set Includes 8 End Caps and 4 Sockets.
A useful set of end cap filter wrenches and filter canister sockets for use on the most popular European vehicles such as BMW, Mercedes, VW / Audi and more. Use with 3/8" drive.
Lisle 54990 - 10 Pc. Asian Filter Wrench Set: $49.19
Set Includes 11 End Cap Wrenches.
A collection of end cap filter wrenches for use on the most popular Asian vehicles such as Toyota, Honda, Nissan, Suzuki, Hyundai, Kia and more. Use with 3/8"drive.
Lisle 57100 - Adjustable Handle Serpentine Belt Tool: $44.16
Features and Benefits:
Two adjustable handles ensure full spring compression
Dual handles connect to the extension to remove and install most serpentine belts
Use one handle to release the spring tension
Engage the second handle where extra travel is needed to compress the spring
Made for work in close quarters
The low profile design allows clearance in tight spots
Seven sockets connect to the drive bar to fit serpentine pulley bolts
Lisle 58600 - Basic Fuel Injection Test Set: $126.77
This set checks fuel pressure on most domestic (except GM TBI) and Japanese Fuel Injection and Throttle Body Injection Systems. Tests the following: Bosch AFC, MPC, Digijet/Digifant - except C.I.S.; Chrysler; Ford; GM - except T.B.I.; Japanese Fuel Injection Systems; others using Bendix-type fuel injection or Schrader-type valve including the small Schrader valve found on Ford.
Lisle 58850 - Oil Pan Plug Rethreading Kit: $100.69
This set includes a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs. The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage. Works on soft steel and aluminum oil pans with 1/2", 12mm & 14mm threads. Can be used on the vehicle when room permits. 58650 Plugs & Gaskets (Set of 5) 58880 Piloted Drill Assembly 58900 Tap
Lisle 60850 - Triple Square Bit Set - 9Pc: $30.99
Nine Piece Triple Square (12 point) Bits to Fit 4, 5, 6, 8, 10, 12, 14, 16 and 18mm Sizes.
For head bolts, brake caliper bolts, door handle screws, axle bolts and other applications. The 4 and 5mm bits have 5/16 hex drive. The 6, 8, 10 and 12mm bits have 1/2 hex drive. The 14 and 16mm bits have 5/8 hex drive. The 18mm bit has a 3/4 hex drive. The three largest sizes are designed to work on tamper-proof applications. The 12 point fasteners are VERY popular on VW/Audi applications!
Lisle 62200 - Heater Hose Coupler Remover: $6.24
Drive the tool into the broken coupler. The splines cut their way into the coupler, allowing you to turn it out with a 5/8" socket or wrench.
Lisle 65600 - Broken Spark Plug Remover for Ford Triton 3 Valve Engines: $68.95
Set Includes a Unique Porcelain Pusher Tool.
This tool set removes broken spark plugs from 2004 and newer Triton 3 valve per cylinder engines, (a common problem). The set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder. Porcelain pusher is used to press the porcelain piece, without breaking the porcelain, farther into the plug tip. This provides space for the left hand thread remover to bite into the stainless steel plug tip so it can then be pulled. Blow-molded storage case included.
Lisle 70500 - Tap Socket Set: $27.63
Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets contained on a vinyl holder.
Lisle 70940 - Tap Socket Set: $21.55
Three Larger Sizes in a Convenient Set.
The three largest tap sockets, also available individually, are now packaged in a three piece set. Ideal for use where a T handle won't fit, especially in restricted areas. For larger, fractional M.C.T.I. standard taps. #9 socket is 5/8" (16mm), #10 is for 11/16" (18mm) and #11 is for 3/4". Sockets contained in a vinyl holder.
Removes and installs filters on 6 Liter Ford Diesel Pickups 
Helps Remove and Install Fuel Filters on 5.9 Liter Cummins Engines.
Drives Camshaft Bearings Smoothly. 
Compresses Dual Brake Pistons Simultaneously.
Dual Purpose Set Detects Both Mechanical and Air Induced Sounds.
Loosens bolts and clamps on tie rods for removal or adjustment.
