If you don't see something, just ask - we might be able to get it!
Majestic 55105 - General Purpose Rail Dolly: $33.26
• For bumping, dinging, straightening and
finishing various portions of body, door panels
and fenders
• Also has 3 beading and flanging lips
• 3-1/8"L x 3" W x 2-3/8"H.Weight: 3 lbs., 2 oz.
• For use in sharp corners and wide radial
portions of body and panels
• 3-1/8"L x 2-1/2"W x 1-3/8"H
•Weight: 2 lbs., 7 oz.
Majestic 55108 - Large Toe Dolly: $35.68
• Flat and low-crown curved faces
• For use in dinging flat surfaces and edges of
lower portions of hook and other flat panels
• 6-3/4"L x 2-3/8"W x 2"H.Weight: 2 lbs., 7 oz.
Majestic 55110 - Thin Toe Dolly: $30.98
• Similar to the Toe Dolly but much thinner
• Fits narrow pockets and other areas not
easily accessible
• 4-7/8"L x 2-1/2"W x 5/8"H.Weight: 1 lb., 10 oz.
Majestic 55112 - Large Comma - Wedge: $40.03
• For use behind brackets, braces and other
reinforcements of roof, body, fenders and panels
• 5-3/4"L x 2-5/8"W x 2"H.Weight: 3 lbs., 14 oz.
Majestic 55113 - Shrinking Toe Dolly: $34.68
• Similar to the Toe Dolly but the curved side is
covered with serrations
• Used to shrink sheet metal that has been
stretched
• 4-3/4"L x 2-1/2"W x 1-1/16"H.Weight: 2 lb., 8 oz.
Majestic 55115 - Shot Dolly: $38.35
• Heavy duty leather pouch filled with
2-1/2 lbs. of shot
• 3-3/4"W x 6"L.Weight: 2 lbs., 10 oz.
Majestic 55116 - Rubber Heel Dolly: $25.69
• Weighted hard rubber to match weight of
hammer – Absorbs shock
• Works well on newer, thinner sheet metal
• Moves the metal rather than stretching it
• 2-1/2"L x 3"W x 1-1/2"H.Weight: 17 oz.
Majestic 55118 - Shrinking Dolly With High & Low Crowns: $34.98
• For hot shrinking, raising beads and molding
• Wide and narrow grooves are provided for
setting in seams for paddle soldering
• Makes excellent combination with Model
55375 Offset and Cross Peen Hammer
• 3-1/8"L x 2-5/8"W x 1-3/4"H.
Weight: 2 lbs., 14 oz.
Majestic 55120 - Large Rubber Dolly: $25.96
• Absorbs the hammer shock and reduces
stretching of sheet metal
• It also reduces hand fatigue
• 5"L x 3"W x 1-1/2"H.Weight 1 lb., 8 oz.
Majestic 55125 - Large Loaf Dolly: $45.19
• Flat and curved surfaces for roughing
• 6-1/4L x 2-1/2"W x 1-3/8"H
• Weight: 5 lbs., 12 oz.
Majestic 55130 - Roughing Out Dolly: $36.67
• Outside contour and side surfaces
• For roughing out both deep and shallow
dents; lip provided at one end for working
surface for re-shaping turned-under flanges
• 5-1/2"L x 4-1/4"W x 2-3/4"H.Weight: 6 lbs.
Majestic 55135 - General Purpose Low Crown Dolly: $36.77
• Low crowns and wide radius for general
purpose contour work
• 3-1/4"L x 2-3/4"W x 2"H.Weight: 3 lbs.
Majestic 55140 - Body Dolly: $36.62
• Has crowns and radii for use on various
curves and contours of the body
• 4-1/2"L x 2-3/8"W x 1-3/4"H
Weight: 3 lbs., 8 oz.
Majestic 55145 - Fender Dolly: $60.51
• Has radii and contours for rolled edges and
fender beads
• 4"L x 3-1/4"W x 2"H. Weight: 3 lbs., 2 oz.
Majestic 55150 - Spoon Dolly: $41.93
• For use in hard to reach places – between
body sheet metal and structural members
• Useful on door panels, rear quarter panels,
trunk lids, good for prying
• 14"L x 2-1/2W x 1"H
• Weight: 4 lbs., 14 oz.
Majestic 55301 - Bumping & Short Finishing Hammer: $28.35
• Lightweight, for close work
• 1-1/4" round head; 1-1/8" square head, flat faces
• 4" long.Weight: 14 oz.
Majestic 55302 - Medium Shrinking Hammer: $37.94
• For all-around work and fast finishing; does
not stretch metal – ideal for close quarters
• 1-1/4" round head, serrated face; 1-1/8" square
head, flat face
• 4" long.Weight: 14 oz.
Majestic 55305 - Cross Peen Hammer: $35.01
• For general work where a blunt chisel end
is necessary
• 1-1/2" round face
• 4-1/2" long.Weight: 14 oz.
Majestic 55309 - Bumping Fender Hammer: $39.59
• For hard-to-reach areas
• Head is 8-3/9" long with a slight curve to reach
deep into fenders and other areas
• Weight: 2 lbs., 7 oz.
Majestic 55330 - 4" Short Pick - Bullet Point Hammer: $27.63
• Pick end 2" long
• A short, bullet point pick for tight areas with
little clearance
• 1-9/16" round head, flat face
• Weight: 10 oz.
Majestic 55332 - 5" Short Pick - Pencil Point Hammer: $22.92
• Pick end 3" long
• For close-in work and finishing
• 1-1/2" round head, flat face; pencil point
• 5" long.Weight: 10 oz.
Majestic 55342 - 7" Medium Curved Pick - Pencil Point Hammer: $22.92
• Pick end 4-1/4" long
• 1-1/2" round head, flat face; pencil point
• Weight: 11 oz.
Majestic 55356 - Bent Door Skin Hammer: $35.11
• Long shaft and small paddle
• Fold the flange on door skins in half the time
• Use on any hard-to-reach area on inner
structure of car
• 6-1/2" long.Weight: 17 oz.
Majestic 55357 - Door Skin Kit: $48.53
• Consists of Bent Door Skin Hammer 55356
and the Rubber Heel Dolly 55116
• Use together to fold new door skins around
the door frame
• Weight: 3 lbs.
Majestic 55358 - Dinging Hammer: $29.52
• Perfectly balanced, for light dinging where
long reach is required
• 1-1/4" round head; 1-3/16" square head;
flat faces
• 6-1/4" long.Weight: 12 oz.
Majestic 55361 - 8" Long Straight Pick - Thin Point Hammer: $26.18
• Pick end 5-1/4" long
• Thin point for long reach; 1-1/2" round head,
flat face
• Weight: 12 oz.
Majestic 55363 - 8" Long Curved Pick - Pencil Point Hammer: $26.55
• Pick end 5-1/4" long
• 1-1/2" round head, flat face; pencil point
• Weight: 12 oz.
Majestic 55364 - Short Chisel Hammer: $22.78
• Round flat head with a 2-1/4" chisel end
• Weight: 10 oz.
Majestic 55366 - Vertical Chisel Hammer: $25.58
• Round flat face with a 3-1/2" vertical chisel
• Designed to reach tight crevices and corners
that are difficult to work with regular hammers
• Weight: 11 oz.
• Cross peen 2-5/8" long
• Designed to be used with Shrinking Dolly
55118
• Curved faces; 1-1/2" square head
• 1-5/8" x 5/8" cross peen head
• 6-1/4" long.Weight: 13 oz.
Majestic 55501 - Slapping Spoon: $19.63
• Use with hammer to reduce metal ridges
• The large polished surface of the spoon
provides a broad face for the hammer to
quickly and evenly work the metal to its
original shape
• Overall length 10"
• Polished surface 4" x 2"
• Weight: 12 oz.
Majestic 55590 - Surfacing Spoon: $29.61
• General purpose fender spoon
• Use for spring hammering, slapping and for
surface metal finishing
• Spreads blow over large surface
• Length: 15"
• Weight: 2 lbs., 8 oz.
Majestic 55591 - High Crown Inside Spoon: $30.68
• Use for roof and hoods or wherever a
high-crown surface is desired
• Good pry spoon when short spoon is
required in cramped spaces
• Length: 15"
• Weight: 2 lbs., 8 oz.
Majestic 55593 - Heavy Duty Inside Spoon: $34.23
• Extra-long curved blade with medium spoon
• Reaches in far behind inner construction to
remove bumps and dents
• Used for moulding panels, beadings, etc.
• Length: 15"
• Weight: 2 lbs., 8 oz.
